900mW 405nm BDR-209 Blu-Ray Laser Diode In Copper Module W/Leads & Glass Lens

Description

Listing is for a single 900mW 16X 405nm BDR-209 Blue-ray Diode in a standard 12mm copper module with leads and thee element glass lens. This is the most powerful 405 diode currently
available
.
The copper module upgrade provides a huge
improvement
in thermal
conductivity
over the standard brass module for moving the heat away from the diode to your heatsink which gives a much more stable output from the diode.
When driven @ 600mA you can expect 900mW+ with a G-2 lens and 650mW+ with a three element 405 AR coated glass lens but the diodes. Efficiency will vary a little and I have seen some hit as high as 1.1W with a G-2 being driven @ 600mA.
Save yourself the headache of extracting, pressing and soldering on your diode. Just add host, heatsink and driver.
The current must be limited to no more than 700mA to the diode suggest 600mA for best life expectancy.
Don't attempt to connect directly to a battery you need a laser driver to power this diode. I do offer a boost driver that is  capable of driving this diode off a single Li-Ion see my other offerings below.
All modules are tested and are in working condition prior to shipping.
Modules are wired with extremely flexible 26AWG wire that is burn proof and makes for very easy soldering.
Wire assignment is:
Red +
Black -
After mounting it up time for a power test using a 405-G-2 lens.
Graph courtesy of ARG.
*Disclamer*
By purchasing these diodes you are agreeing to the following.
- You are over 18 years of age .
- You understand that these components that are mentioned above are dangerous when not properly assembled into a finished product.
- You will use these as components and properly incorporate them into a finished product.
- You will use these diodes/modules in a safe and responsible manner and for a legal purpose.
- You are legally responsible for the use of these components, improper use of these components or their end products.
- You are legally responsible for any injury to anybody resulting from the use of or assembly of these components or their finished products.
- You Accept this diode/module as a COMPONENT for integration in a system of YOUR OWN design and will be legally responsible from any and all LIABILITIES These Diodes and Modules are sold solely as a component for incorporation into the customer's end products. Therefore, this diode/module is exempt from compliance with the appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete products.