700mW 405nm S06J Blu-Ray Copper Laser Module W/Boost Driver & G-2 Glass Lens

Description

Listing is for a single 500mW 12X 405nm S06J Blueray Copper Module W/Boost Driver & 405-G-2 Glass Lens. Perfect for running off a single rechargeable 3.7V Li-Ion or a 5V 2A wall adapter. Unit is ready to be dropped into your final project. Just place in a heatsink and apply 3-5V from a 2A+ capable power supply.
The copper module upgrade provides a
huge
improvement
in thermal
conductivity
over the standard brass module for moving the heat away from the diode to your heatsink for a stable output from the diode.
Modules are wired with extremely flexible 26AWG wire that is burn proof and makes for very easy soldering.
Here is what you get. The driver is contained in the module.
You can discard the back half if you need the extra room just be careful not to let the driver short on anything.:)
This is a genuine S06J 405nm diode not the lower efficiency more sensitive 12X diode from the SF-BW512L that are often sold as S06J.
Wire assignment is:
Red +
Black -
Specs
Wavelength                                     405nm +/- 5nm
Input Voltage                                   3V-5.5V
Driver Output Current                     500mA(default)
Driver Current Draw                       1100mA +/- 0.5A
Power Output                                  650mW-750mW
Driver Type                                     Constant Current
Lens                                                 9mm Threaded 405nm-445nm AR Coated Glass Lens
Duty Cycle                                       Continuous with proper heatsinking
Sony 12X S06J Laser Diode
Been working off Morgans old testing data and the graphs that were made from it which can be seen here.
New Kid On the Block S06J
So here is a nice new testing thread on it. It has been around a while so no need for long introduction. Test done with a G-2 lens.
*Disclamer*
By purchasing these diodes you are agreeing to the following.
- You are over 18 years of age .
- You understand that these components that are mentioned above are dangerous when not properly assembled into a finished product.
- You will use these as components and properly incorporate them into a finished product.
- You will use these diodes/modules in a safe and responsible manner and for a legal purpose.
- You are legally responsible for the use of these components, improper use of these components or their end products.
- You are legally responsible for any injury to anybody resulting from the use of or assembly of these components or their finished products.
- You Accept this diode/module as a COMPONENT for integration in a system of YOUR OWN design and will be legally responsible from any and all LIABILITIES These Diodes and Modules are sold solely as a component for incorporation into the customer's end products. Therefore, this diode/module is exempt from compliance with the appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete products.