20mm 4W NUBM06 445nm Laser Diode In 20mm Copper Module W/Leads & DTR-G-2 Lens

Description

Listing is for a single 9mm
4W NUBM06 445nm
laser diode
mounted in a 20mm x 30mm copper module with solid copper back half, leads and a DTR-G-2 glass lens.
This module is designed for easy mounting in a 20mm XYZ mount that can be purchased separately like this one.
SK-20 Bearing CNC Aluminum Rail Linear Motion Shaft Support Series Slide 20mm
This NUBM06 diode is capable of over 5W output when using a DTR-G-2 lens and 4A current with proper heatsinking.
Save yourself the headache of pressing and soldering. Just add heatsink and a laser driver limiting the current to 4A or less.
Diodes are current hungry and as they heat up their internal resistance is  lowered causing them to want to draw more current. Don't attempt to  connect the diode directly to a fixed voltage source like a battery. You must use a laser driver limited to no more than 4A to power this diode.
Suggested Drivers
NUBM06 Laser Drivers
Here is what you get. One
9mm
4W NUBM06 445nm
diode
mounted in a massive 20mm x 30mm copper module with leads and a DTR-G-2 glass lens
.
Here is one mounted
in a 20mm XYZ mount that can be purchased separately like this one.
SK-20 Bearing CNC Aluminum Rail Linear Motion Shaft Support Series Slide 20mm
*Disclamer*
By purchasing these diodes you are agreeing to the following.
- You are over 18 years of age .
- You understand that these components that are mentioned above are dangerous when not properly assembled into a finished product.
- You will use these as components and properly incorporate them into a finished product.
- You will use these diodes/modules in a safe and responsible manner and for a legal purpose.
- You are legally responsible for the use of these components, improper use of these components or their end products.
- You are legally responsible for any injury to anybody resulting from the use of or assembly of these components or their finished products.
- You Accept this diode/module as a COMPONENT for integration in a system of YOUR OWN design and will be legally responsible from any and all LIABILITIES These Diodes and Modules are sold solely as a component for incorporation into the customer's end products. Therefore, this diode/module is exempt from compliance with the appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete products.